| The Studio Projects CS1 is an externally polarized
cardioid pressure gradient transducer microphones with FET impedance
converter. The capsule is a 1.06” (27mm) capsule, with a diaphragm
thinkness of 6µm. It features four selectable pads, four high pass
filters, and four low pass filters for added control in various
recording applications and a clear, full response expected from a large
capsule microphone design.
Versatility
is key in the recording arena, and the Studio Projects CS1 is well
equiped to handle any recording application. It is designed to deliver
the finest quality vocal and instrumental recordings and will serve to
enhance any professional or project studio.
As
a result of uncompromising dedication and advanced production
capabilities, Studio Projects will continue to broaden the range of
quality pro audio microphones & electronics for today's recording
environment.
Features
• Pressure-Gradient Transducer: 1.06" (27mm)
6um mylar diaphragm
• FET impedance converter
• -5dB, -10dB, -15dB, and -20dB Pads
• 50hZ, 75hZ, 150Hz, and 300hZ High Pass Filters
@ 6dB/octave
• 15kHz, 7kHz, 5kHz, and 3kHz, Low Pass Filters @ 6dB/octave
Included
Accessories
• Halo Shockmount
•
Foam wind screen
•
Case
|
CS1 Technical Specifications: |
| |
Type:
|
Pressure
gradient transducer microphone |
| Polar pattern: |
Cardioid |
| Frequency response: |
20~20000Hz |
| Sensitivity: |
14mV/Pa=-32dB(0dB=1V/Pa). |
| Output impedance: |
<200 Ohm |
| Load impedance: |
>1000 Ohm |
| Maximum SPL: |
134 dB SPL for
1% THD @1000Hz (0dB SPL=0.00002Pa). |
| Noise: |
10 dB-A (A-weighted per IEC268-15) |
| S/N: |
84 dB-A |
| Pads: |
-5dB, -10dB, -15dB,
and -20dB selectable |
| Low Cut: |
15kHz, 7kHz, 5kHz,
and 3kHz 6dB/Octave |
| High Cut: |
50hZ, 75hZ, 150Hz, and 300hZ 6dB/Octave |
| Power requirement |
48 +/- 4V |
| Current consumption: |
<4mA |
| Connector: |
Gold-plated 3-pin XLR |
| Circuit: |
JFET driven, discrete balanced output |
|
