| The new Studio Projects B3 is the ultimate in large diaphragm
condenser microphones at this price anywhere. This microphone has all
the technical refinements to be an enduring classic . With features you
would expect in a world class microphone, the B3 offer's three
recording pattern positions (cardioid, omni and a true figure eight)
with pad and Hi-Pass filter.
Equipped
with a true 1" 3 um gold sputtered dual gold large diaphragm in a
pressure gradient transducer capsule, the B3 will ensure the finest
quality of recordings while offering linear response and a classic deep
rich sound. The B3 can be connected to any external microphone
preamplifier or mixing console which provides 48 volt phantom power
or via any 48 volt external power supply. 
Features
• Pressure-Gradient Transducer, Dual 1"
3 um mylar capsule
• Selectable patterns (omni, cardioid, figure
eight)
• High Pass Filter
• 10db Pad
Included
Accessories
• Zippered Bag
• Foam Wind Screen
• Shockmount

|
B3 Technical Specifications: |
| |
Type:
Polar pattern:
Frequency response:
Sensitivity:
Output impedance:
Load impedance:
Maximum SPL: |
FET 3 micron 1" large dual diaphragm
Cardioid, Figure of Eight, Omni
20~20000Hz
14/16/18mV/Pa(Omni./Cardioid/Figure
8)
(-37/-36/-35dB @1000Hz)
<200 Ohm
>1000 Ohm
132/142dB
SPL for 1% THD @1000Hz(0dB/-
10dB pad, 0dB
SPL=0.00002Pa)
|
Noise:
S/N:
Pad:
Low cut:
Power requirement
Current consumption:
Connector:
Circuit: |
14dB-A (Cardioid)
80 dB
-10dB
6dB/Octave at 150 Hz
48 +/- 4V
<2.5mA
Gold-plated 3-pin XLR
Transformerless circuit.
(featuring extremely low self noise and large dynamic range) |
|