The Shure ULX® Professional wireless receiver offers an exceptional value in both performance and price, for both working musicians and sound installers. The expanded feature set of the ULXP4 wireless receiver, with advanced settings and controls including lockable settings and group scan, offers a direct path to full, clear audio signals.

ULXP4 Receiver Features

• Automatic Frequency Selection with group scan function
• Over 1400 selectable frequencies
• Predictive Diversity
• 5-segment transmitted audio signal strength meter
• 5-segment RF meter
• 3-segment transmitter battery fuel gauge
• Advanced multi-function LCD displays group and channel
• Mic/Line switch
• Remotable 1/2-wave antenna
• Frequency and volume lockout
• XLR and 1/4-inch output
• Rugged metal chassis
• 1/2 rack design

The low-profile, highly durable body-pack ULX1 has all the characteristics to meet the demands of high performance. For use with headworn, lavalier and instrument microphones, as well as guitars and basses. Attaches to belt, waistband or guitar strap with clip for hands-free mobility.

ULX1 Features

• Three-segment battery fuel gauge
• Frequency and power lockout
• Flexible 1/4 wave antenna
• TA4F mini four-pin input connector
• Backlit LCD display shows group and channel setting
• Adustable audio gain control
• Input attenuation switch (selects 0 dB or -20 dB attenuation)
• PEAK icon appears when audio input overloads the transmitter
• Power on/off switch
• 8 hour battery life (9V battery)
• 300 foot (100m) operating range

The Shure Model WH30 is a light yet rugged headset microphone. Designed for vocalists and instrument-playing vocalists, the WH30 utilizes a high quality electret-condenser cartridge suitable for all applications where mobility, comfort, low microphone-visibility, and high sound quality are required. Because of its cardioid (unidirectional) pickup pattern, the WH30 provides isolation from extraneous sound sources and high gain-before-feedback.

The wireframe and gooseneck adjust to any head size and shape. An integrated elastic headband comfortably pads and secures the headset. The WH30 is supplied with two snap-on windscreens, clothing clip, storage bag and cable-management device.

The WH30 headset microphone is a perfect fit for those who desire total freedom of movement and need the high-quality audio of a condenser microphone.

WH30TQG Features

• Tailored frequency response enhances vocal range
• Flexible gooseneck for optimum microphone placement
• Isolation shock mount reduces vibration noise
• Low-profile, lightweight design
• Cardioid polar pattern provides maximum gain before feedback
• High sound pressure level capability
• Secure snap-on windscreen reduces "p" pops

WH30TQG Specifications

• Type: Condenser, electret bias
• Frequency Response: 40 to 20,000 Hz
• Polar Pattern: Unidirectional
• Output Impedance: -55.5 dB (1.7 mV)
• Signal to Noise Ratio: 63 dB at 94 dB SPL (IEC 651)
• Output Clipping Level: -22 dBV (0.08 V)
• Maximum SPL: 130 dB
• Dynamic Range: 99 dB
• Output Noise: 31 dB (typical, A-weighted)
• Recommended Operating Voltage: 5 VDC (pin 2 to pins 3 and 4)
• Polarity: Positive sound pressure on diaphragm produces positive voltage on pins 3 and 4 relative to pin 1 (ground) on the mini TA4F connector
• Cable: 5 ft two-conductor, shielded
• Cable Connector: mini TA4F
• Net Weight: 2.3 oz (headset)