The Monitor Station is the ultimate desktop monitoring and
communications system for your recording studio. Based on the
award-winning Central Station, the Monitor Station provides talkback,
speaker switching, input source switching and four ultra loud and clear
headphone amplifiers delivering everything you need to control your
recording environment.
Input Switching
The
Monitor Station allows you connect up to three input audio streams
(TRS1, TRS2, Aux/Phono) allowing you to switch between and compare
different inputs. One application is used to connect your computer
recording system main outputs to the TRS 1 inputs and a CD player's
outputs to the Aux inputs on the Monitor Station to compare your mix
with a commercial CD with the touch of a button.
Speaker Switching
Three
sets of speaker outputs are loaded on the Monitor Station allowing you
to audition your mix on different speakers to take the guessing out of
how your mixes will translate in the real world.
Main and Cue Routing
The
Monitor Station allows each of the stereo inputs (TRS1, TRS2, aux) to
be routed to one of two audio paths, "main" and "cue". The Monitor
Station allows you to route two separate signals (Main and Cue) to each
of the four headphone amplifiers.Send a mix with click track to TRS 2
input while sending the "main mix" to TRS 1. You can then enable the
headphone amplifiers to listen to either cue or main mix. The main
audio path always feeds what you will hear in the control room.
Total Communication
Communication
during recording is essential. No more yelling when you need to talk to
the musicians wearng headphones. Use the Monitor Station talkback
system with onboad or external microphone to communicate with the
musicians.
Customize Your Monitor Station
Three
different functions on the Monitor Station can be set and saved during
power up so that you can customize your recording system for the way
you work.
Input selection can be set in either "summing" mode
(TRS1, TRS2, and Aux/Phone are summed together when engaged), or in
"toggle" mode (TRS1, TRS2, and Aux/Phono can only be selected one at a
time).
Speaker selection can either work in "all on" mode
(speaker A, B and C can be engaged simultaneously), in "toggle" mode
(speaker A, B, and C can only be selected one at a time), or in
"subwoofer" mode (A and B are selectable while C can be selected with A
or B).
The Monitor Station's LED signal meters can also be set in
three different modes for various signal levels (-10dB, +4dB and +10dB).
Headphone Amplifiers that "go to 11"
PreSonus
has built a reputation for delivering the best-sounding headphone
amplifiers available. Each of the four headphone amplifiers loaded in
the Monitor Station deliver 150 milliwatts and are able to power any
headphone with as much loud and clear volume needed for everyone in the
band, including the drummer.
- Main speaker volume adjustment
- 3 stereo inputs (two balanced TRS, one RCA Aux/Phono)
- Three sets of balanced TRS speaker outputs each with level adjustment
- Talkback microphone with volume control to feed headphone and Cue output
- XLR input for external dynamic talkback microphone
- Accurate dual 8-segment LED for metering
- 4 loud and clear headphone amplifiers with separate volume control and independent input source selection
- Main and Cue stereo output with independent input source selection
- Dim with variable level adjustment
- Aux and Phono level adjustment
- Mute and Mono
Monitor Station Manual (PDF)